TMC Pro Clear UV30 Advantage
Fitting your Pro Clear Advantage unit could not be easier. The unit is connected into the water circulation system as shown below and connected to a mains electricity supply in the same way as fitting a plug.
The unit is designed to be positioned either on its base on a flat surface, or attached horizontally to a vertical surface using the brackets provided, and is supplied with dual inlet/outlet fittings allowing the unit to be fitted in the most convenient position available.
The unit is supplied with dual inlet/outlet fittings allowing the unit to be fitted in the most convenient position available and universal hosetails are included to take 1", 11/4"and 11/2"flexible hose. No glueing is required. Full instructions are enclosed with each unit.
Easy to Use
Pro Clear Advantage units require virtually no maintenance and use unique translucent hose connectors which glow to show that the UV lamp is working.
Environmentally safe
Using ultraviolet light, Pro Clear Advantage units destroy the green, single-celled water borne algae which make garden ponds murky and unattractive. As no chemicals are used, there is no danger of pollution or over treatment of the water and sensitive plant and pond life is not affected.
At the heart of each Pro Clear Advantage unit is an ultraviolet lamp sealed inside a quartz sleeve. As water is pumped through the unit, ultraviolet light from the lamp destroys the algae, leaving the water clear.
Pro Clear Advantage UV30 which is suitable for ponds of up to 6,000 imp. gallons (27,000 litres) with a maximum flow rate of 3,000 imp. gallons (13,500 litres) per hour.
