Tunze Comline Filter - 3166.500
Comline Reefpack 500 and Riverpack 600 can be extended by other Comline components in a perfect manner. Depending on the aquarium biotope and the aquarium size, the performance can be increased.
Compact and easy-to-use: The filter components in COMLINE water treatment technology. Comline filter 3166 operates with quick-change filter cartridges, and can be used to remove suspended detritus as well as to skim surface film. The pumps are placed below the filter chamber. The Comline filter can be retrofitted with the osmolator 3155. The biologically important osmotic regulation, a perfect active surface suction, as well as the necessary evaporation compensation in the aquarium is safeguarded.
The double filter 3167 in the Comline series are two filter chambers in one piece. The advantage is that one filter pump only is required for two filter chambers. This filter is especially suitable for larger pumping capacities: Turbelle® powerhead or Turbelle® electronic.
The double filter 3167 in the Comline series are two filter chambers in one piece. The advantage is that one filter pump only is required for two filter chambers. This filter is especially suitable for larger pumping capacities: Turbelle® powerhead or Turbelle® electronic.
The surface suction and osmotic regulation are equally effective as in filter 3166.
Delivery condition: Ready for mounting with filter bowl and wadding cartridge, without pump. The holding device supplied permits four different installation options – see drawing.
For aquariums from 200 to 600 litres
(52.8 to 158.5 USgal.).
Filter performance: 1,650 l/h (435.8 USgal./h).
Energy consumption: 11 W.
Voltage / frequency: 230V/50Hz (115V/60Hz).
Cable length: 2 m (78.7 in.).
Dimensions: L 113 x W 113 x H 300 mm
(L 4.4 x W 4.4 x H 11.8 in.).
Magnet holder up to a glass thickness of 15 mm (.59 in.).
(52.8 to 158.5 USgal.).
Filter performance: 1,650 l/h (435.8 USgal./h).
Energy consumption: 11 W.
Voltage / frequency: 230V/50Hz (115V/60Hz).
Cable length: 2 m (78.7 in.).
Dimensions: L 113 x W 113 x H 300 mm
(L 4.4 x W 4.4 x H 11.8 in.).
Magnet holder up to a glass thickness of 15 mm (.59 in.).
Suitable pumps:
Turbelle® powerhead
600/2 for 630 l/h (166.4 USgal./h)
1000/2 for 1,080 l/h (285.3 USgal./h)
1600/2 for 1,620 l/h (427.9 USgal./h)
Turbelle® electronic 5001
Turbelle® powerhead
600/2 for 630 l/h (166.4 USgal./h)
1000/2 for 1,080 l/h (285.3 USgal./h)
1600/2 for 1,620 l/h (427.9 USgal./h)
Turbelle® electronic 5001
