Tunze Master Electronic Pump - 1073.090
The Master electronic pump sets new standards in the field of water pumps for continuous operation in freshwater and saltwater. At a high pumping head and high pumping capacity, the conventional market frequently offers the following solutions: Air-cooled asynchronous motor pumps requiring costly servicing or synchronous motor pumps used in ponds which are not resistant to lime. Heating pumps are also converted into aquarium pumps causing the danger of poisoning by metal ions. The Master electronic pump instead uses a fully electronically controlled synchronous motor, encapsulated in PU resin, and with a very high efficiency. The only moveable part is the pump drive, consisting of a magnetic rotor running on ceramics, and a high-performance impeller. These properties permit low-noise use as submerged motor-driven pumps or as pumps fitted outside of the aquarium as pump and impeller housing are completely water-tight. The pumps have been designed in keeping with the strictest international safety standards.
VERY LOW ENERGY CONSUMPTION on account of the synchronous motor with permanent magnet rotor; the energy consumption is 50 per cent lower than in similar pumps fitted with asynchronous motor.
HIGH PERFORMANCE on account of the specifically designed impeller and the defined sense of rotation.
LOW-NOISE OPERATION on account of the precise pump drive and hydrodynamic ceramic bearing.
VERY LOW SERVICING as the motor contains one moveable part only. The pump is insensitive to liming in saltwater; the motor has been fitted with a protective thermostat.
COMPACT DIMENSIONS
CABLE 10 m (393.6 in.), three-pole plug.
8,300 l/h (2,192 USgal./h), 120 W, Hmax 5 m (197 in.), 230V/50Hz (115V/60Hz).
